Modify Device Settings - Visonic Fully supervised wireless accessories Accessories Manual

SR-730 PG2

5. MODIFY DEVICE SETTINGS

This section describes how to configure the parameters of the siren from the PowerMax10-G2 control panel.
To Modify the Siren Device Settings
Refer to the PowerMax10-G2 Installer Guide and perform the procedure for Adding A Wireless Device (section 4.4.2), or,
Modifying a Device (section 4.4.5). Then continue below to modify the device settings.
1.
When the PowerMax10-G2 display reads [DEV SETTINGS], press
The PowerMax10-G2 display will read [STROBE ALARM].
2.
Press the
I OK
The PowerMax10-G2 display will read [Timer limited ].
3.
Press the
limited", "Disabled" and "Until Disarmed" for example, "Until
Disarmed".
4.
Press to confirm the selection.
I OK
The PowerMax10-G2 display will revert to [STROBE ALARM].
5.
Press the
The PowerMax10-G2 display will read [ EXIT-ENTRY Beeps ].
6.
Press the
I OK
The PowerMax10-G2 display will read [Disabled
7.
Press the
"Disabled @ Home" and "Enabled", for example, "Enabled".
8.
Press to confirm the selection.
I OK
The PowerMax10-G2 display will revert to [ EXIT-ENTRY Beeps ].
9.
Press the
The PowerMax10-G2 display will read [SQUAWK].
10.
Press the
I OK
The PowerMax10-G2 display will read [Disabled
11.
Press the
"Sounder only", "Strobe only" and "Sounder+strobe" for example,
"Sounder+Strobe".
12.
Press to confirm the selection.
I OK
The PowerMax10-G2 display will revert to [SQUAWK].
13.
Press the
The PowerMax10-G2 display will read [SOUNDER VOLUME].
14.
Press the
I OK
The PowerMax10-G2 display will read [Volume HIGH
15.
Press the
24
button.
or button repeatedly to select between "Timer
button.
button.
or button repeatedly to select between "Disabled",
button.
button.
or button repeatedly to select between "Disabled",
button.
button.
or button to select between "Volume HIGH",
.
I OK
].
].
].
I OK
STROBE ALARM
I OK
Timer limited
or
Until Disarmed
I OK
Disabled
STROBE ALARM
EXIT-ENTRY Beeps
I OK
Disabled
or
Enabled
I OK
enabled
EXIT-ENTRY Beeps
SQUAWK
I OK
Disabled
or
Sounder+Strobe
I OK
Sounder+Strobe
SQUAWK
SOUNDER VOLUME
I OK
Volume HIGH
or
D-302758