Record Speech - Visonic PowerMaster-10 G2 Installer's Manual

Option
CUST. ZONES NAME
TEXT LOC. #05 1
TEXT LOC. #05 2
TEXT LOC. #05 3
TEXT LOC. #05 4
TEXT LOC. #05 5

5.8.2 Record Speech

You can record short-duration speech messages for the house identity, user names and custom zone names.
For the recording procedure follow the instructions below. Additional details and guidance are provided in section 5.2.
06:CUSTOM NAMES
Enter "RECORD SPEECH", select the menu you wish to perform (see guidance above), then refer to the tables below
which provide you with detailed explanations for each option.
Option
HOUSE IDENTITY
To advance to the next stage in the recording procedure; from the "HOUSE IDENTITY" menu, click
Option
USER #23 VOICE
VOICE LOC. #1
1
Refers to PowerMaster-30 G2 with voice option only
D-303222 PowerMaster-10/30 G2 Installer's Guide
Configuration Instructions
Enter the five Custom Location names you wish to use instead of the "Custom 1" to
"Custom 5" names in the Location List in Section 5.4.2.
To program:
to enter the "CUST. ZONES NAME" sub menu and then press
Press
select the Location # you wish to program, for example "TEXT LOC. #05 1". Press
display shows the current Custom name, for example "Custom 1". To change the name, at
the blinking cursor, enter the Location name you wish and at the end, press
When done, press
Note: To enter the Location name use the "String Editor" at the end of section 5.6.3.
1
  
RECORD SPEECH
Instructions
You can record a message to be announced automatically when events are reported to
private telephones.
While in "RECORD SPEECH", press
alternates with "REC-<2> PLAY-<5>" (this means, press the
button to play recording).
To initiate the recording procedure, press the
message; "RECORD A MESSAGE" appears momentarily and then changes to
"TALK NOW 
" (the square boxes slowly disappear, one by one, until the end of the
recording time).
At the end of the recording process, the panel will display the following:
"RECORDING ENDED". Release the
Note: To check the recorded message, press the
Instructions
You can record ten user names and assign them to users 23-32. In case of event, the
relevant user name will be added to the message that will be reported via the telephone.
Record user names for 23-32; the procedure is identical to the "HOUSE IDENTITY" recording
procedure described above. Click
You can record user terms 1- 5 (for example, Living room, Library, etc.), and assign them to
specific zones. These names are useful if none of the 26 fixed zone names are found
suitable for a certain zone. When done, press
Record user terms 1-5; the procedure is identical to the "HOUSE IDENTITY" recording
procedure described above. Click
to return.
; the display now reads "HOUSE IDENTITY" and
button.
to navigate between user name numbers.
to navigate between user term numbers.
5. PROGRAMMING
button to record and the
button continuously to record your
button and listen to the playback.
to return.
again to
; the
to confirm.
.
55