Disarming And Stopping Alarms; Siren Behavior; Speech And Sound Control; Speech And Sound Control Pushbuttons - Visonic powermax+ User Manual

To stop the alarm, press
valid user code.

2.13 Disarming and Stopping Alarms

Disarming the system stops the siren before it stops
automatically, irrespective of whether the alarm was
initiated in the armed or the disarmed state.
After disarming, different displays may appear, depending
on the current status of the system:
A. Disarming - no events: After an uneventful armed
term, the disarming operation will progress as shown:
Action
C O D E
[ ]
R E A D Y
ARM indicator extinguishes
B. Disarming after alarm, with all zones ready: If
the zone that alarmed in the armed state is back to
normal, the disarming operation will progress as shown:
Action
C O D E
[ ]
R E A D Y
R E A D Y
ARM indicator extinguishes
To read the alarm memory, refer to Section 5. The
"MEMORY" message will disappear only upon re-
arming the system.
C. Disarming after an alarm, with one zone still
disturbed: If the zone that alarmed in the armed state
is still disturbed, the disarming operation will progress
as shown in the following table.
Action
C O D E
[ ]
N O T R E A D Y H H : M M
N O T R E A D Y M E M O R Y
ARM indicator extinguishes
To read the alarm memory, refer to Section 5. The
"MEMORY" message will disappear only when you
rearm the system.
If you do not know how to return the disturbed zone to
normal, consult your installer.

3. SPEECH AND SOUND CONTROL

3.1 Speech & Sound Cont. Push-buttons
The sound and speech-related functions offered by the
PowerMax+ are controlled with the keypad, as detailed in
the following list.
Key Function
Increasing the loudness of spoken messages
Decreasing the loudness of spoken messages
disabling the loudspeaker
DE5467U
and then key in your
Resultant Display
_ _ _
H H : M M
Resultant Display
_ _ _
H H : M M
(alternating)
M E M O R Y
Resultant Display
_ _ _
(alternating)
D. Disarming with the system in a state of
trouble. If trouble is detected in the armed state, the
TROUBLE indicator on the front panel will light and the
disarming operation will progress as shown:
Action
[ ]
Sound
ARM extinguishes and
To find out what kind of trouble is being sensed, see
Section 5. The TRBL display will disappear, the
☺
TROUBLE indicator will extinguish and the trouble
beeps will stop upon eliminating the cause for trouble.
E. Disarming after an alarm, with the system in
a state of trouble. The TROUBLE indicator on the
front panel will light. If the zone that alarmed while the
system was in the armed state is back to normal, the
disarming operation will progress as shown:
Action
Sound
[ ]
☺
ARM extinguishes and
To find out which zone alarmed and what kind of trouble
is being sensed, see Section 5. The TRBL display will
disappear, the TROUBLE indicator will extinguish and
the trouble beeps will stop upon eliminating the cause
for trouble. The MEMORY message will disappear only
upon rearming the system.
F. Disarming under Duress. If you are forcibly
Sound
compelled to disarm the system, enter the default
duress code (2580) or another code set by the installer.
Disarming will take place normally but a silent alarm will
☺
be transmitted to the central station.

2.14 Siren Behavior

Continuously ON when initiated by a burglar zone or a
24-hour zone, and when a user initiates a "panic alarm".
When initiated by a fire zone (smoke is detected) ON - ON -
ON - pause - ON - ON - ON - pause - ........ and so on.
If there is nobody around to disarm the system upon alarm
and a zone remains "open", the siren will sound for the
time duration set by the installer - then will stop. The strobe
light keeps flashing until the system is disarmed.
Recording a spoken message for other users of
the alarm system
Listening to a recorded message left by another
user of the alarm system
Enabling / disabling the chime function in chime zones

3.2 Adjusting the Speech Volume

The following diagram shows how to increase the loudness
by clicking the <1> key (assuming that the volume was at
minimum to begin with).
Resultant Display
_ _ _
C O D E
R E A D Y H H : M M
(alternating)
R E A D Y T R B L
sounds once per minute
Resultant Display
_ _ _
C O D E
R E A D Y H H : M M
(alternating)
R E A D Y T R B L
(alternating)
R E A D Y M E M O R Y
sounds once per minute
Sound
☺
Sound
☺
9