Diskette Drive Problems - NEC PowerMate Pro 2180 User Manual

Table of Contents

Advertisement

Diskette Drive Problems

Check the following problems to see the possible cause and
solution.
Diskette won't load
Check that the diskette is being loaded correctly.
Check that the system and monitor power lamps are on
and the power-on screen appears.
Check that the diskette is formatted. If not, format it.
See your operating system documentation.
If the diskette drive busy lamp does not light when you
load the diskette, try a different diskette. If this loads, the
problem is in the software.
Non-System Disk or Disk Error message displayed
If you are booting from the diskette drive, insert a
diskette with system files into drive A.
If a bootable diskette does not boot, use the Setup Utility
to verify that the initial boot parameter is set to diskette
drive A and not a hard disk.
If You Have a Problem 8-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate pro 2200Powermate pro2200 series

Table of Contents