Table of Contents
Advertisement
BIOS RECOVERY
If an interruption occurs during the BIOS upgrade that
prevents continuation of the process, it is possible that the
BIOS may be left in an unstable state. Use the following
procedure to recover your BIOS.
1.
Power off the system and unplug any peripherals.
The system power must be off before removing the
cover and changing a jumper setting.
Remove the system unit cover (see "Removing the
2.
System Unit Cover" in Chapter 5).
Locate the BIOS Recovery jumper on the system board
3.
(see the figure "Locating system configuration
jumpers").
4.
You may have to remove any installed expansion
boards to access the jumpers (see "Removing
Expansion Boards" in Chapter 5).
5.
Remove the jumper block from pins 4-6 and set it on
pins 2-4.
!
WARNING
Setting System Board Jumpers 6-5
Advertisement
Table of Contents
