Use Setup Utility (default)
the information provided by you in the following fields
to prevent conflicts between the Plug and Play and ISA
legacy boards. You should not install and use run-time
Plug and Play software such as Configuration Managers
and the ISA Configuration Utility (ICU).
Boot with PnP OS
The Boot with PnP OS field enables the system to boot
with an operating system capable of managing Plug and
Play add-in cards. The choices are as follows.
ISA Shared Memory Size
The ISA Shared Memory Size field is used to set a block
of system memory which will not be shadowed.
(Shadowing is a technique which copies a block of
memory from an address in the expansion board's ROM
to the same address in the system memory to allow faster
access to the code and achieve higher performance.)
If "Disabled," all upper memory is shadowed and ISA
Shared Memory Base Address field is not displayed.
This field provides the following choices.
When a value other than "Disabled" is selected, a block
is unshadowed and the ISA Shared Memory Base
Address field will appear.
None
Other
Windows95 (default)
Disabled (default)
16 KB
32 KB
48 KB
The BIOS depends upon
NEC Drivers and Utilities 4-25