Receive The Hardware - NEC Express5800/A1160 Installation Manual

Receive
the Hardware
Component
Management serial port
Partition serial port
Maintenance LAN port
Partition video port
USB management port
Partition LAN ports
Navigation buttons
LED status indicators
Power supplies
Interconnect cable connectors

1.8. Receive the Hardware

System components are shipped to you from a number of sources.
Your order may contain a number of boxes shipped from different locations. Each box
containing a cell is marked to indicate which cell is contained in it. When you unpack
each cell, ensure that the cell is labeled and that the label information matches the cell
number indicated on its box.
Inspect the exterior of each shipping box and pallet. If any damage is visible, make
an appropriate note on the shipping paperwork.
Move the packaged hardware as close to its final destination as possible.
Take an inventory of the hardware to ensure that all required items are present.
To report any missing, incorrect, or defective parts during unpacking, contact the NEC
Technical Support. Refer to
1-6
A 9-pin serial port for the management board.
A 9-pin serial port for the operating system.
An RJ45 port that provides a 10/100 Mbps Ethernet network
connection to the maintenance LAN.
A 15-pin SVGA port.
A USB 2.0 port for use with the management board.
Two RJ45 ports that provide 10/100/1000 Mbps Ethernet
network connections for the operating system. These ports
are typically connected to the public LAN.
Enables the selection of EXPRESSSCOPE® Monitor menu
options.
Provides status for the cell. The top light indicates power
status. The bottom light indicates cell status. See the
EXPRESSSCOPE® Monitor LCD or the remote console
interface for additional information on the power or cell status.
Two power supplies that provide n+1 redundancy when used
in high-voltage configurations. Each power supply has its own
AC power cord.
High-speed serial interface and management LAN
connections between the cells in configurations with two or
more cells.
1.6 Customer Support Procedures
Description