Components On The Rear Of A Cell; Figure 1-3 Rear Of The Cell; Table 1-3 Components On The Rear Of A Cell - NEC Express5800/A1160 Installation Manual

Component
LED status indicators
DVD-RW drive
Partition USB connections
1.7.2.

Components on the Rear of a Cell

Figure 1-3 identifies the components that are visible on the rear of the cell.
describes these components in more detail.
Component
PCIe carrier/cards
Cell ID
Partition USB ports
Provides status for the cell. The top light indicates power
status. The bottom light indicates cell status. See the
EXPRESSSCOPE® Monitor LCD or the remote console
interface for additional information on the power or cell status.
A DVD-RW drive for your use.
Provides two universal serial bus (USB) 2.0 ports.

Figure 1-3 Rear of the Cell

Table 1-3 Components on the Rear of a Cell

Six hot-plug switched PCIe 8x card slots. Slots 1 and 4 can
support full-length cards. Each PCIe card is housed in an
individual carrier.
An LED that is lit when the ID button on the
EXPRESSSCOPE® Monitor is pressed. Press the cell ID
button on the rear of the cell to turn off the light.
Two universal serial bus (USB) 2.0 ports.
Cell Components
Description
Description
Table 1-3
1-5