Install The Cell Rail Assemblies; Figure 2-1 Cabinet Configuration - NEC Express5800/A1160 Installation Manual

Install
the Cell Rail Assemblies

2.2. Install the Cell Rail Assemblies

This procedure is for installing cell rail assemblies in a NEC cabinet; however, the rails
are designed to fit in most cabinets. Installation instructions are provided for cabinets
with square-hole or round-hole brackets. If you ordered a cabinet with your system,
follow the procedures for installing rails in a cabinet with square-hole brackets.
Note: A cell requires 4U of space in the frame.
Before you begin, remove the cell rails, hardware, and power cables from the cell
shipping carton. Set the power cables aside for
The left and right rails are different, as shown in
2-2

Figure 2-1 Cabinet Configuration

Section 4 Cabling the System
Figure 2-2.