Figure 3-6 One Four-Receptacle Power Strip Installation - NEC Express5800/A1160 Installation Manual

Install
the Power Strips
the Velcro straps.
3. Install the power strips at the rear of the cabinet. Position the power strips so that
the cables from the cells and any peripherals reach the appropriate strip when the
cables are routed and secured to the frame.
4. Use the illustration provided for the type of power strip to be installed.
Four-Receptacle Power Strips
Use this procedure if you did not purchase a cabinet from NEC.
To install the four-receptacle power strips to the frame, screw two screws through the
frame into the rear of the power strip, as shown in
for round or square-hole cabinets.

Figure 3-6 One Four-Receptacle Power Strip Installation

Two Four-Receptacle Power Strips in a Mounting Bracket
Before you begin the installation, mount the power strips to the mounting bracket using
the instructions provided in the box with the power strips.
3-6
Figure 3-6. Use the same procedure