Command Prompts; Screen Simulations; Conventions - HP PROCURVE 2910AL Configuration Manual

■ Boldface indicates use of a CLI command, part of a CLI command syntax,
or other displayed element in general text. For example:
"Use the copy tftp command to download the key from a TFTP server."
Italics indicate variables for which you must supply a value when execut­
■
ing the command. For example, in this command syntax, you must provide
one or more port numbers:
Syntax: aaa port-access authenticator < port-list >

Command Prompts

In the default configuration, your switch displays a CLI prompt similar to the
following example:
ProCurve 2910al#
To simplify recognition, this guide uses ProCurve to represent command
prompts for all switch models. For example:
ProCurve#
(You can use the hostname command to change the text in the CLI prompt.)

Screen Simulations

Displayed Text. Figures containing simulated screen text and command
output look like this:
ProCurve> show version
Image stamp: /sw/code/build/info
November 6, 2008 13:43:13
W.14.01
139
Boot Image: Primary
ProCurve>
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden­
tification. For example:
ProCurve(config)# clear public-key
ProCurve(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Getting Started

Conventions

1-3