Ipv6 Management Features; Tftpv6 Transfers; Ipv6 Time Configuration; Telnet6 - HP PROCURVE 2910AL Configuration Manual

Introduction to IPv6
Configuration and Management

IPv6 Management Features

The switch's IPv6 management features support operation in an environment
employing IPv6 servers and management stations.With a link to a properly
configured IPv6 router, switch management extends to routed traffic solu­
tions. (Refer to the documentation provided for the IPv6 router.) Otherwise,
IPv6 management for the switches covered by this guide are dependent on
switched management traffic solutions.

TFTPv6 Transfers

The switch supports these downloads from an IPv6 TFTP server:
■
■
■
■
■
■
The switch supports these uploads to an IPv6 TFTP server
■
■
■
■
■
Refer to "TFTP File Transfers Over IPv6" on page 5-15.

IPv6 Time Configuration

The switch supports both Timepv6 and SNTPv6 time services. Refer to "SNTP
and Timep" on page 5-9.

Telnet6

The switch supports both of the following Telnet6 operations:
■
■
Refer to "Telnet6 Operation" on page 5-6
2-10
automatic OS download
manual OS download
command script download and execution
configuration file downloads
public key file downloads
startup configuration file downloads
startup or running configuration upload
OS upload from flash in current use (primary or secondary)
event log content upload
crash log content upload
output of a specified command
Enable (the default setting) or disable Telnet6 access to the switch from
remote IPv6 nodes.
Initiate an outbound telnet session to another IPv6 networked device.