Download Print this page

HP PROCURVE 2910AL Configuration Manual: Displaying An Ssh Configuration

Ipv6.
Hide thumbs

Advertisement

Displaying an SSH Configuration

To verify an SSH for IPv6 configuration and display all SSH sessions running
on the switch, enter the show ip ssh command. Information on all current SSH
sessions (IPv4 and IPv6) is displayed.
ProCurve(config)# show ip ssh
SSH enabled
TCP Port Number
Timeout (sec)
Secure Copy Enabled
IP Version
Ses Type
| Source IP
--- ------
+ ----------------------------
1
console
|
2
ssh
| 192.168.31.114
3
telnet
|
4
inactive |
: Yes
: 22
: 120
: Yes
: IPv4orIPv6
IPv6 Management Security Features
Displays the current SSH configuration and status.
The switch uses these five SSH settings internally
for transactions with clients.
Here SSH is enabled for IPv4 and IPv6 clients.
Port
---- -
1722
With SSH running, the switch supports one console
session and up to five other SSH and Telnet (IPv4
and IPv6) sessions.
Web browser sessions are also supported, but are
not displayed in show ip ssh output.
Source IPv6 IP addresses of SSH clients are
displayed in hexadecimal format.
Secure Shell for IPv6
6-17

Advertisement

Chapters

Troubleshooting

   Related Manuals for HP PROCURVE 2910AL

Comments to this Manuals

Symbols: 0
Latest comments: