Fostex D-160 Owner's Manual page 193

D-160 Owner's Manual (MMC/FEX List/Maintenance/Specifications)
Declaration of EC Directive
This equipment is compatible with the EMC Directive (89/336/EEC) -
Directive on approximation of member nation's ordinance concerning
the electromagnetic compatibility and with the Low Voltage Directive
(73/23/EEC) - Directive on approximation of member nation's
ordinance connecting electric equipment designed to be used within
the specified voltage range.
The Affect of Immunity on This Equipment
The affect of the European Specification EN50082-1 (coexistence of
electromagnetic waves - common immunity specification) on this equipment are
as shown below.
* In the electrical fast transient/burst requirements, radiate electromagnetic
field requirements and static electricity discharging environment, this could
be affected by generation of noise in some cases. The display content
could also differ from actual figures.
Please comply to the precautions below to make this equipment compatible with
European Specification EN50082-1 (coexistence of electromagnetic waves -
common immunity specification).
<NOTE>
Caps are installed on the rear panel MIDI IN/OUT/THRU and SCSI
connectors. The purpose of these caps are to prevent static electricity from
affecting this equipment. Do not remove these caps except when using the
MIDI IN/OUT/THRU and SCSI connectors.