Erasing Specific Data - Fostex D-160 Owner's Manual

3-5. Erasing specific data (Program erase)
Here, erase all data recorded in any program that is no longer necessary.
Unlike the "erasing the program" explained in "Recording/Playback", the program number
will remain intact and other settings will all be in the initial state same as when the New
Program was made (at completion of erase, ABS 0=ABS END).
Therefore, the tempo map setting and program title will be in the initial figures.
Note that the UNDO/REDO function cannot be used at Program Erasing.
1/9 2/10 3/11
PUNCH
IN / OUT
1. Press the STORE key while holding down the HOLD/> key.
The D-160 will enter the Program Setup mode, and display the message "Select PGM!", and then
the current Program number and title. (The Program number and "SURE?" will flash.)
"Select PGM!"
Example:
(02 flash, 02 is the current program number)
2. Turn the JOG dial to select the number of a Program you wish to erase.
The selected Program number will flash. (Can not use "New Program?.")
3. Press the ERASE key.
"Erase PGM**?"
The message
the display, and "SURE?" will flash.
4. Press the EXECUTE/YES key.
When the erase operation is completed, the display changes to the
menu in Setup mode, where you can name the Program from which you erased the data.
* To name the Program, follow the explanation on page "147" regarding the "2-4. Title Edit
PGM?" menu in Setup mode.
If you do not wish to name the Program, press the STOP button or the EXIT/NO key.
The display will change to the ABS indication, with the Program number unchanged.
The title of the Program is erased, and the Program will use a temporary title.
<Note>
D-160
DIGITAL MULTITRACK RECORDER
RECORD TRACK
4/12 5/13 6/14 7/15 8/16 SHIFT
LOCKED HD ACCESS MTC IN
"P02 [*****"
->
(where, ** is the selected Program number) appears on
101
D-160 Owner's Manual (Edit function)
AUTO RTN
CLIPBOARD AUTO PUNCH
AUTO PLAY IN OUT START IN OUT END
AUTO RTN
COPY MOVE PASTE ERASE UNDO REDO
AUTO
REHEARSAL
PUNCH LOCATE VARI PITCH
TAKE
RECORD STOP PLAY REWIND F FWD
CLIPBOARD PLAY
LOCATE ABS 0
LOCATE ABS END
3
"Title Edit PGM**?"
4
EXECUTE EXIT
DISP SEL /YES /NO
TIME BASE SEL
HOLD/ STORE RECALL
PGM CHANGE
1
2