Punch In/Out Rehearsal - Fostex D-160 Owner's Manual

D-160 Owner's Manual (Punch In/Out)
2-1. Punch In/Out Rehearsal (Using a foot switch)
Rehearsal
1. Press the foot switch once while holding down the STOP button.
2. Press the RECORD TRACK select key "3" to set Track 3 to ready mode. (Indicator
3. Press the PLAY button at a location just before the punch in point to play back
4. Rehearse the guitar part while playing back the drum and bass sounds.
5. Press the foot switch once at the Punch In point, and press the foot switch
Rehearsal mode (manual Punch In/Out)
RECORD TRACK display
REHEARSAL LED
TAKE LED
PLAY button LED
RECORD button LED
End of rehearsal
1. Press the foot switch again while holding down the STOP button to cancel
The D-160 will enter the "Rehearsal" mode, and the 35 dot display on the upper
row of the screen will show "Rehearsal On" for one second. Only the REHEARSAL
LED (green) will blink.
"3" will flash.)
data.
again at the Punch Out point. The following diagram illustrates this operation.
You will hear the guitar sound you are playing only between the punch in and
out points.
All tracks are under REPRO
monitoring status.
3
REHEARSAL LED will blink
PLAY
PLAY LED will light up
Rehearsal mode.
The 35 dot display on the upper row of the screen will show "Rehearsal Off"
for one second. Also, the REHEARSAL LED (green) will turn off, indicating that
you have quit the Rehearsal mode.
PUNCH IN point
Only Track 3 enters INPUT monitoring
status. (However, the D-160 will not
record any data in Rehearsal mode.)
Press the foot
switch once.
3
Blink
REHEARSAL LED will blink
PLAY
PLAY LED will light up
RECORD
RECORD LED will blink
82
PUNCH OUT point
All tracks are under REPRO
monitoring status.
Press the foot
switch again.
3
Light up
REHEARSAL LED will blink
PLAY
PLAY LED will light up
Blink