Fostex D-160 Owner's Manual page 16

D-160 Owner's Manual (Names and Functions)
15. Auto Return End key [AUTO RTN END]
16. Auto Punch In key [AUTO PUNCH IN]
17. Auto Punch Out key [AUTO PUNCH OUT]
Memory keys (CLIPBOARD IN, CLIPBOARD OUT, AUTO RTN START, AUTO PUNCH
IN, AUTO PUNCH OUT, and AUTO RTN END keys) have the following common
functions:
* Pressing a Memory key to recall the point the key is storing (or pressing the RECALL
key, and then the Memory key) displays the memory data (time, or bar/beat/clock)
currently stored in that key; then the unit enters data edit mode. To edit data, use
the HOLD/> key or the SHUTTLE dial to move among the digits, and then use the JOG
dial to change the value.
* After you finish editing data, press the STORE key, and then press one of the Memory
keys into which you want to store the point. The edited data will be stored in the
specified Memory key.
* While the current position of the recorder is indicated, press the STORE key, then one
of the Memory keys into which you want to store the data. The current position or the
recorder will be stored in the Memory key. You can do this while the recorder is
running or stopped.
* Press a desired Memory key, and then press the LOCATE key to locate the point stored
in that Memory key (time, or bar/beat/clock).
* All memory data can be stored to Programs 1-99 individually.
* In Setup mode, you can save or load song data for each Program.
* All data will be retained after you turn off the power.
* Refer to page "67" for more information on memory data.
* Refer to page "67" for more information on the Locate function.
* Refer to pages "28" and "49" for more information on the Program Change function.
* Refer to page "102" for more information on saving and loading song data.
This key is used to store and recall the end point (AUTO RTN END point) for the Auto
Return or Auto Repeat operation.
You can locate a stored AUTO RTN END point.
* Refer to page "69" for more information about Auto Return and Auto Repeat.
This key is used to store and recall the recording start point (AUTO PUNCH IN point) for
the Auto Punch IN/OUT operation. This point is also used as an erase point.
You can locate a stored AUTO PUNCH OUT point.
* Refer to page "75" for more information about Auto Punch In/Out recording.
* Refer to page "85" for more information about pasting data.
* Refer to page "96" for more information about the Erase operations.
This key is used to store and recall the recording end point (AUTO PUNCH OUT point) for
the Auto Punch IN/OUT operation. This point is also used as an erase point.
You can locate a stored AUTO PUNCH OUT point.
* Refer to page "75" for more information about Auto Punch In/Out recording.
* Refer to page "96" for more information about the Erase operation.
16