2-2.2 Windows 98 Driver Installation - SIIG CyberParallel Dual Installation Manual

Hide thumbs Also See for CyberParallel Dual:

Table of Contents

CyberParallel Dual User's Manual

2-2.2 Windows 98 Driver Installation

Follow the steps listed below to install the Windows 98

drivers:

1. At the Add New Hardware Wizard windows, click on

"Next".

2. Select the option "Search for the best driver for your

devices (Recommend)", and click on "Next".

3. Select the option "Specify the location", and type in

a:\Win98 then click on "Next".

4. Click "Next" and then "Finish" respectively.

5. Remove the diskette, then select "Yes" to restart the

computer for the setup to take effect.

To verify successful installation in Windows 95/98:

1. From the main desktop, click on My Computer, then

double-click on Control Panel, System, and Device

Manager.

2. Double-click on either Ports (COM & LPT) or SIIG Cyber

PCI device options. SIIG CyberParallel Dual Board

should be displayed when successfully installed. The

port is ready to connect new device.

2-4

Table of Contents

Do you have a question about the CyberParallel Dual and is the answer not in the manual?