Table of Contents
Advertisement
Quick Links
Introducing the CyberSerial ExpressCard
The CyberSerial ExpressCard adds one high-speed serial
ports to an ExpressCard equipped computer.
Features and Benefits
•
Compatible with hi-speed modems, monitoring
equipment, serial networking and other serial
devices
•
One DB9 RS232 ports with 16950 UART
•
Supports data rate of up to 920 Kbps
•
Built-in 128-byte FIFO buffers dramatically increase
data transmit/receive speed, especially under
Windows multitasking environment
System Requirements
•
Notebook or desktop computer with an available
ExpressCard slot
•
Windows
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000
Package Contents
•
CyberSerial ExpressCard
•
Driver CD
•
Quick installation guide
04-0574A
CyberSerial ExpressCard
Quick Installation Guide
7 (32-/64-bit) / Vista (32-/64-bit) / XP
®
1
Advertisement
Table of Contents
Related Manuals for SIIG CyberSerial ExpressCard
Summary of Contents for SIIG CyberSerial ExpressCard
- Page 1 CyberSerial ExpressCard Quick Installation Guide Introducing the CyberSerial ExpressCard The CyberSerial ExpressCard adds one high-speed serial ports to an ExpressCard equipped computer. Features and Benefits • Compatible with hi-speed modems, monitoring equipment, serial networking and other serial devices • One DB9 RS232 ports with 16950 UART •...
-
Page 2: Hardware Installation
ExpressCard are provided below. Since the design of notebook computers vary, refer to your system’s reference manual for further information, if needed. Insert the CyberSerial ExpressCard into the ExpressCard slot of the computer with it's Express Card Connector facing the slot. Push the card into the slot gently, yet firmly for a solid connection. -
Page 3: Driver Installation
Driver Installation This section provides information on how to install the CyberSerial ExpressCard drivers. Windows 7 / Windows Vista™ At the Found New Hardware window, click Locate and install driver software (recommended), click Continue. Insert the driver CD. Click Don't search online. - Page 4 Click Finish. Repeat steps 1-4, then restart Windows to complete the installation. Windows Server 2008 At the Found New Hardware window, click Locate and install driver software (recommended). Insert the driver CD. Click Don't search online. Click I don't have the disc. Show me other options. Click Browse my computer for driver software (advanced).
-
Page 5: Changing Com Port Number
To Verify Windows Installation Check Device Manager to verify successful driver installation. Windows 7 / XP / Server 2003 / 2000: Right click Computer or My Computer, click Manage, click Device Manager. Windows Vista: Right click Computer, click Manage, click Continue, then click Device Manager. Windows Server 2008: Right click Computer, click Manage, double click Diagnostics, click Device Manager. -
Page 6: Removing The Expresscard
Click the Unplug or Eject Hardware or Safely Remove Hardware icon located in the taskbar by the system clock. Click Stop SIIG CyberPro 1S board or Safely remove SIIG CyberPro 1S board At the Safe To Remove Hardware box, the CyberSerial... -
Page 7: Technical Support And Warranty
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product. - Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 CyberSerial ExpressCard is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other names used in this publication are for identification only and may be trademarks of their respective companies.