Advertisement
Quick Links
Features and Benefits
•
Compliant with USB specifications revision 2.0
•
Conforms to PCI specifications revision 2.2
•
Supports simultaneous operation of multiple
high-speed USB 2.0 and USB 1.1 devices
•
Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes
•
User friendly hot-swapping feature allows you to
attach/remove USB devices without turning off
your system
Note: USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host adapter
or USB 2.0 hubs.
System Requirements
PC:
•
Pentium
•
Windows
Server 2003/Vista
Mac:
•
Power Mac G3 (blue & white) or later with an
available PCI slot
•
Mac OS 10.2.8 or later
04-0469A
Dual Profile Hi-Speed
USB 4-Port PCI
Quick Installation Guide
®
-class computer with an available PCI slot
®
2000 SP4 or later/XP SP1 or later/
1
Advertisement
Related Manuals for SIIG Dual Profile Hi-Speed USB 4-Port PCI
Summary of Contents for SIIG Dual Profile Hi-Speed USB 4-Port PCI
- Page 1 Dual Profile Hi-Speed USB 4-Port PCI Quick Installation Guide Features and Benefits • Compliant with USB specifications revision 2.0 • Conforms to PCI specifications revision 2.2 • Supports simultaneous operation of multiple high-speed USB 2.0 and USB 1.1 devices • Supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data transfer modes...
-
Page 2: Hardware Installation
Package Contents • Dual Profile Hi-Speed USB 4-Port PCI • Spare enhanced low profile bracket* • Quick installation guide Layout Internal port External ports Figure 1: Layout Hardware Installation * Note: For Low Profile systems, replace the currently mounted bracket with the included Low Profile bracket. -
Page 3: Windows Driver Installation
Remove the slot bracket from an available PCI slot. Carefully align the card to the selected PCI slot, push the board down firmly, but gently, until it is well seated. Replace the slot bracket holding screw to secure the card. Replace the computer cover and reconnect the power cord. -
Page 4: Mac Os Driver Installation
Mac OS Driver Installation Mac OS has built-in driver support for this controller. Just install the board and Mac OS will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Mac OS Driver Installation Mac OS X (v10.2.8) The only way to verify the board works is actually connecting devices to the USB ports. - Page 5 Blank Page...
- Page 6 Blank Page...
-
Page 7: Technical Support And Warranty
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510) 413-5333. - Page 8 6078 Stewart Avenue Fremont, CA 94538-3152, USA Dual Profile Hi-Speed 4-Port PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Mac and Mac OS are registered trademarks of Apple Computer, Inc.