Switch Reboot - Allied Telesis AT-GS950/24 User Manual

Chapter 2: Basic Switch Configuration

Switch Reboot

48
Caution
Since you define this password as part of the process of disabling
this function, Allied Telesis has no knowledge of it. You are
responsible for keeping the password in a safe place. If it is lost,
Allied Telesis does not have a way to help you recover it.
See "Disabling Factory Default Reset Feature" on page 51 for information
about how to disable the factory default reset feature.
The following procedure outlines how to reboot your AT-GS950/24 switch.
Caution
This procedure reboots the switch and reloads the AT-S109 Version
1.1.0 Management software configuration from flash memory.
Insure that your current configuration is saved before rebooting the
switch by selecting Save Configuration to Flash from the main
menu on the left side of the page to permanently save your changes.
All configuration parameters that have not been previously saved
are lost. After the switch is reboots, they are reset to the values
stored in the flash memory.
Caution
This procedure causes the switch to reboot. The switch does not
forward network traffic during the reboot process. Some network
traffic may be lost.
1. From the main menu on the left side of the page, select the Tools
folder.
The Tools folder expands.
2. From the Tools folder, select Reboot.
The Factory Default Reset/Reboot Page is displayed. See Figure 14.