Viewing - Allied Telesis AT-GS950/24 User Manual

Type - Because the IP Address being entered is static, you must
select Static.
Lease Time - Enter the time that IP address assignment is valid. The
range is 10 to 4294967295 seconds.
2. Click Add.
The static address information is entered into the Binding Database.

Viewing

Dynamically assigned IP address from the DHCP server will automatically
populate the table on the Binding Database page. You must enter
statically assigned IP Addresses and their corresponding fields at the top
of the web page. See "Static IP Addresses" on page 236 for more
information.
The Binding Database table at the bottom of the web page displays the
following information:
MAC Address - This parameter shows the host's MAC Address.
VLAN ID - This parameter shows the host's VLAN ID of which the
DHCP client is a member.
IP Address - This parameter is the IP Address assigned by the
DHCP server to the DHCP client.
Port - This parameter is the port number where the DHCP client is
connected.
Type - This parameter indicates the following:
Lease Time - This parameter is the time that IP address
assignment by the DHCP server is valid.
3. If the Page field located below the table displays a page number, then
there are multiple pages of the table that you can navigate. This is
done by clicking on the First Page, Previous Page, Next Page, and
Last Page buttons located below the table.
Learned - The host IP Address is dynamically assigned by the
DHCP server.
Static - The host IP Address is statically assigned. See "Static
IP Addresses" on page 236 for more information.
AT-GS950/24 Web Interface User Guide
237