Figure 111. Firmware Upgrade Via Tftp Page - Allied Telesis AT-GS950/24 User Manual

Chapter 24: Management Software Updates
316

Figure 111. Firmware Upgrade via TFTP Page

The Image/Version Date shows the current version and date of
software installed on the switch.
3. Change the following parameters as necessary:
TFTP Server IP - The IP address of the TFTP server from which
you are downloading the new software.
Image File Name - The full name of the AT-S109 Version 1.1.0
file (including the file extension) you are downloading.
Retry Count - The number of times the firmware upgrade is
retried. The range is 1 - 20.
4. To activate your changes on the switch, click Apply. The software
immediately begins to download onto the switch. This process takes a
few minutes. After the software download is complete, the switch
initializes the software and reboots. You will lose your web browser
connection to the switch during the reboot process.