Cpu Clock Ratio; Spread Spectrum - Albatron PX845GEV Series User Manual

PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA
controller and map it to their display as a way to provide boot information and VGA
compatibility.
Options: Disabled (default)、Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the 32 PCI Clock
it will optimize PCI speeds.
Options: 0-255、32 (default)
INT Pin 1 - 8 Assignment
This item allows you to select an IRQ address for your onboard function.
Options: Auto (default)、3、4、5、7、9、10、11、12、14、15
Frequency/Voltage Control
Default CPU Voltage (Volt)
This item display the CPU Voltage information; which detected by the system.
CPU Voltage (Volt)
This item allows you to adjust your CPU core voltage
Options range from 1.100V~1.850V

CPU Clock Ratio

Before you configure this option, please make sure that your CPU ratio can be adjusted.
This item displays the CPU ratio information detected by the system.
Options: 8x - 50X

Spread Spectrum

The Spread Spectrum function can reduce the EMI (Electromagnetic Interference) generated.
Options: Enabled (default)、Disabled
CPU Host Frequency (MHz)
This item displays the CPU Host Clock. You can set it from 100 to 248. The default
depends on your CPU frequency. If you over-clock the following 3 items can be adjusted.
Default: 100
Fixed AGP/PCI Output Freq
This item allows you to fix the AGP/PCI output frequency at 66MHz/33MHz. You may
need to adjust this value when over-clocking is unsuccessful.
Options: Disabled (default)、 66MHz/33MHz
PX845PEV/ GEV Series
36