Albatron PX845GEV Series User Manual page 24

Headers & Jumpers
Front USB Headers: USB2 / USB3
1 2
+5V +5V
DATA_A- DATA_B-
DATA_A+ DATA_B+
Ground Ground
NC OVC
9 10
USB2
1 2
+5V +5V
DATA_A- DATA_B-
DATA_A+ DATA_B+
Ground Ground
NC OVC
10
9
USB3
USB bracket (optional)
You can connect the USB bracket to the USB2 and USB3 Headers.
* If you are using USB 2.0 devices, you will need to install the USB 2.0 driver from
® ®
Microsoft Windows
Case Open Warning connector: CASE OPEN
This connector is used to modify the user when the computer case has been previously
opened. To configure this functionality, your computer case must be equipped with a " case
open" cable which you need to attach to the CASE OPEN connector. Also, you must enable
CASE OPEN warning functionality in the BIOS setup utility. When your computer case is
opened, your system will display alert messages up on boot up. (Please make sure your
computer case have the case open lead).
Ground 1
Caseop-
2
CASE OPEN
DIMM1
DIMM2
DIMM3
®
2000 or Windows XP.
DIMM1
DIMM2
DIMM3
21
PX845PEV/ GEV Series
ATX_PWR
The layout is PX845PEV PRO
ATX_PWR
The layout is PX845PEV PRO