Key Function - Albatron PX845GEV Series User Manual

DRAM Support
DDR (Double Data Rate) SDRAM (Synchronous DRAM) is supported.
Supported CPUs
This PHOENIX-AWARD™ BIOS supports the Intel

Key Function

In general, use the arrow keys to highlight items, press <Enter> to select, use the <PgUp>
and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit. The
following table provides more detail about how to navigate within the Setup program using
the keyboard.
Keystroke
Up arrow
Down arrow
Left arrow
Right arrow
Esc
Submenus: Exit Current page to the next higher level menu
Move Enter
PgUp key
PgDn key
+ Key
- Key
Esc key Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
F1 key
F5 key
F6 key
F7 key
F10 key
Function
Move to previous item
Move to next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Main Menu: Quit without saving changes
Move to the item you desired
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
Current page and return to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the fail-safe defaults from BIOS default table
Load the optimized defaults
Save all the CMOS changes and exit
28
PX845PEV/ GEV Series
® ®
Pentium 4 CPUs.