Chapter 1. Getting Started; Introduction - Albatron PX845GEV Series User Manual

Socket 478 intel 82845pe/ce & 82801db supports intel pentium 4 processor
Table of Contents

Advertisement

Chapter 1. Getting Started

Introduction

Congratulations on choosing the PX845PEV/GEV series mainboard! The PX845PEV series
includes the PX845PEV 、 PX845PEV PRO and the PX845GEV series includes the
PX845GEV、PX845GEV PRO. It is based on Intel
82845GE (PX845GEV series) / 82801DB chipsets. It also supports Intel
Processors with a FSB (Front Side Bus) frequency of 400/533 MHz.
The PX845PEV/GEV series provides 3 sockets using 184 pin DDR SDRAM with a total
capacity of up to 2GB. You can install DDR 333/266/200 (PC2700/2100/1600) SDRAM
with the option of using the BIOS Setup to over-clock to DDR400.
The PX845PEV/GEV series provides one AGP Slot for 4X (1.5V only) AGP cards.
The PX845PEV/GEV series includes built in IDE facilities that support Ultra DMA
33/66/100 BMIDE and PIO Modes. The PX845PEV/GEV series also comes with an AC'97
Sound Codec (ALC650) which supports high quality 6 channel audio (Super 5.1 Channel
Audio Effect).
The PX845PEV/GEV series also comes with six USB 2.0 ports.
The PX845PEV/GEV series also come with AGP protection with ensures that you only
install 1.5V AGP cards.
PX845PEV PRO/PX845GEV PRO also comes with a LAN Chip which supports a back
panel LAN port.
PX845PEV/ GEV Series
®
82845PE (PX845PEV series) or
1
®
®
Pentium
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Px845pev series

Table of Contents