Memory Installation - Albatron KX600A Series User Manual

FAN Headers
Three power headers are available for cooling fans, which play an important role in maintaining the
ambient temperature in your system.
Attention
This system has a BIOS configuration feature that issues a warning
(during POST) when the CPU fan is not plugged in or is not functioning.
In order to make use of this feature. You must make sure that the CPU
power cable is attached specifically to the "CPUFAN" header. The BIOS
configuration option is described in the "Hardware Monitor" section of
the BIOS Setup Utility Chapter.

Memory Installation

The KX600A Series contain 3 sockets, which use 184- pin DDR SDRAM with a total memory
capacity of up to 3 GB. You can install unbuffered & non-ECC DDR400/ 333/ 266 (PC3200/ 2700/
2100) SDRAM. It supports only DDR266 when installed with CPUs that have clock speeds of 100
MHz.
9
KX600A Series