Memory Installation - Albatron KM400A series User Manual

Hide thumbs Also See for KM400A series:
Table of Contents

Advertisement

FAN Headers
Three power headers are available for cooling fans, which play an important role in maintaining the
ambient temperature in your system.

Memory Installation

The mainboard contains 2 sockets, which use 184 pin DDR SDRAM with a total memory capacity of
up to 2 GB. You can install unbuffered & non-ECC DDR400/ 333/ 266/ 200 (PC3200/ 2700/ 2100/
1600) DDR SDRAM.
The KM400A Series supports 64 bit channels memor
GB.
1
DIMM1
DIMM2
Attention
This system has a BIOS configuration feature that issues a warning
(during POST) when the CPU fan is not plugged in or is not
functioning. In order to make use of this feature. You must make sure
that the CPU power cable is attached specifically to the "CPUFAN"
header. The BIOS configuration option is described in the "Hardware
Monitor" section of the BIOS Setup Utility Chapter.
y bus with a total memory capacity of up to 2
DIMM1
DIMM2
10
KM400A Series

Advertisement

Table of Contents
loading

Table of Contents