Memory Installation; Ram Module Installation - Albatron KM400T-8X Pro User Manual

Memory Installation

The KM400T-8X Series contain 2 sockets, which use 184- pin DDR SDRAM with a total memory
capacity of up to 2 GB. You can install unbuffered/ registered non-ECC DDR333/ 266/ 200
(PC2700/ 2100/ 1600) SDRAM.
BIOS

RAM Module Installation:

1. Pull the white plastic tabs on each side of the slot away from the slot.
2. Match the notch on the button of the RAM module with the corresponding pattern in the
DIMM slot. This ensures that the module is inserted properly.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the
module snaps into place.
4. Repeat steps 1, 2 and 3 for the remaining RAM modules.
* The pictures above are for reference only and may vary slightly for your mainboard.
DIMM1
DIMM2
10
KM400T-8X Series