Table of Contents
Advertisement
Section 3, Configuration
Utilities
If the self test results are...
PASS
BAD RAM DATA
BAD RAM ADDRESS
BAD CODE CHECKSUM
BAD BOOT SECTOR
IOX PROGRAM FAILURE
AFE PROGRAM FAILURE
MODEM FAILURE
ETHERNET FAILURE
STS-1 FAILURE
DSX FAILURE
CONFIGURATION CORRUPT
Load Default Settings
Select Load Default Settings from the Utilities menu. The screen displays the following message:
!WARNING! Defaulting configuration will disrupt traffic on all ports.
Select
to proceed or press
Confirm
The IP Address, Default Gateway, and subnet mask are not reset when
default settings are loaded.
Loading the default settings resets the User Account Management table to
a single default account adtran/adtran/admin.
3-38
Table 3-14.
Self-Test Results
The self-test was successful and the unit is ready to use.
Contact ADTRAN Technical Support.
Select S
C
AVE
ONFIGURATION
dition persists, contact ADTRAN Technical Support.
to abort.
E
SC
NOTE
NOTE
MX2800 STS-1 User Manual
Then...
from the main C
ONFIGURATION
menu. If con-
61204659L1-1A
Advertisement
Table of Contents
