T1 Data Dictionary; Table 9-8. Tl1 Editing Data Dictionary For T1 - ADTRAN MX2800 STS-1 System Manual

Section 9, Transaction Language 1 (TL1)
TL1 Error Codes

T1 Data Dictionary

Table 9-8 contains entries that are used to edit or retrieve options for the T1 portion of the MX2800. When
performing TL1 edit commands from this table, the value of
one of the following:
101 - DS1#1
102 - DS1#2
.
.
.
128 - DS1#28
Keyword
DSXCAISRLY
DSXCVTHRS
DSXLAISRLY
DSXLOSRLY
DSXPROTTHRS
9-24

Table 9-8. TL1 Editing Data Dictionary for T1

Type Domain
Y/N Y or [N]
ENUM One of the following:
• DISABLE
• 1E3
• 1E4
• 1E5
• 1E6
Y/N Y or [N]
Y/N Y or [N]
INT 1-28
MX2800 STS-1 User Manual
rr should be T1, and the
Description
Provisions alarm relay response for DSX
CAIS alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Indicates a limit on the number of code
violations accepted by the unit over a
single T1/E1 before the unit switches
controller cards
• 1E3 - 1 out of every 1,000 bits on a sin-
gle T1/E1 contains a CV
• 1E4 - 1 out of every 10,000 bits on a
single T1/E1 contains a CV
• 1E5 - 1 out of every 100,000 bits on a
single T1/E1 contains a CV
• 1E6 - 1 out of every 1,000,000 bits on a
single T1/E1 contains a CV
Provisions alarm relay response for the
DSX LAIS alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Provisions alarm relay response for the
DSX LOS alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Number of Enabled lines that must fail
before a protection switch occurs
<aid> value should be
61204659L1-1A