Table of Contents
Advertisement
MX2800 STS-1 User Manual
AID*
CTAG*
PARAM1*
RTRV-COND-{EQPT|rr|ALL};
Description
MOD2
TID*
* An asterisk indicates optional command blocks.
61204659L1-1A
Table 9-2. TL1 Commands (Continued)
Identifies the component to which the desired alarm pertains. Identifiers are depen-
dent on the entity specified in "MOD2" as follows:
for T1:
101.... DS1#1
102.... DS1#2
.
128.... DS1#28
ALL ... all DS1 circuits (default selection)
for VT1:
201.... VT1#1
202.... VT1#2
.
228.... VT1#28
ALL ... all VT1 circuits (default selection)
for STS-1:
301.... STS-1#1
302.... STS-1 (Control Card A)
303.... STS-1 (Control Card B)
501 ....J Path Trace
ALL ... all STS-1 circuits (default selection)
for EQPT:
401.... Generic
402.... Control Card A
403.... Control Card B
404.... Power Supply A
405.... Power Supply B
502 ....BITS Clock (Control Card A)
503.... BITS Clock (Control Card B)
ALL ... all EQPT identifiers (default selection)
for ALL:
x........ specific identifier (e.g. "1", "28",etc.,)
ALL ... all identifiers (default selection)
Transaction Number (integer)
Specifies what notification code to query:
MN .......minor
MJ ........major
CR........critical
Retrieves the requested condition
Specifies what entity type to query:
EQPT ...General Equipment Unit
rr...........Facility or Circuit (i.e. T1, VT1, STS1)
ALL.......All entity types
Target ID
Transaction Language 1 (TL1), Section 9
TL1 Commands
9-9
Advertisement
Table of Contents
