Table of Contents
Advertisement
Section 9, Transaction Language 1 (TL1)
TL1 Error Codes
TL1 Editing
TL1 editing commands allow the MX2800 to be provisioned through a TL1 session rather than through the
menu system that is accessed using a VT100 terminal emulator. User account information must be provi-
sioned through a console menu session or TL1 session prior to initiating a TL1 session. Once a TL1
session has been initiated using the ACT-USER command, see
commands may be used. The standard format for an edit command is as follows:
ED-rr:<tid>:<aid>:<ctag>:::<keyword>=<value>;
The parameter descriptions are as follows:
• rr is T1, VT1, STS1, or EQPT
• <tid> is the Target Identifier
• <aid> is the Access Identifier
• <ctag> is a 1-to-6 character correlation tag (echoed in response)
• <keyword> is one of the entries from the data dictionaries in
page 21,
Table 9-8
on page 24, or
• <value> is one of the enumerated types in the data dictionaries, an integer, or Y/N, depending on the
TYPE.
<aid> and <ctag> are optional parameter. The placemarker : must remain
in place. The default <aid> is All and the default <ctag> is 1.
TL1 Editing Examples:
ED-STS1:UNIT-1:301:1:::TMG=LPD; (This edits timing for STS1 #1 to be loop timing.)
ED-VT1:UNIT-1:205:2:::LBO=133TO266; (This edits line build out for VT1 #5 to be 133 to 266.)
ED-EQPT:UNIT-1:401:4:::PSTEMPCRITRLY=Y; (This enables the alarm relay for power supply temper-
ature critical.)
To view the value of a parameter, a retrieve (RTRV) command is used. The standard format for the RTRV
command is as follows:
RTRV-rr:<tid>:<aid>:<ctag>:::<keyword>;
The parameter descriptions are as follows:
• rr is T1, VT1, STS1, or EQPT
• <tid> is the Target Identifier
• <aid> is the Access Identifier
• <ctag> is a 1 to 6 character correlation tag (echoed in response)
• <keyword> is one of the entries from the following data dictionaries in
on page 21,
Table 9-8
9-16
Table 9-9
on page 26.
NOTE
on page 24, or
Table 9-9
Table 9-2
on page 6, the TL1 editing
Table 9-6
on page 18,
Table 9-6
on page 26.
MX2800 STS-1 User Manual
Table 9-7
on
on page 18,
Table 9-7
61204659L1-1A
Advertisement
Table of Contents
