ADTRAN MX2800 STS-1 System Manual page 150

Section 9, Transaction Language 1 (TL1)
TL1 Error Codes
Table 9-7. TL1 Editing Data Dictionary for VT1 (Continued)
Keyword
VTAISRLY
VTCFGMODE
VTCFGSTATE
VTCFGCIRCUITPROT
VTLBKDETECTION
VTHAIRPINNING
VTLOPRLY
VTMAPPING
VTRFIRLY
9-22
Type Domain
Y/N Y or [N]
ENUM One of the following:
• T1
• E1
ENUM One of the following:
• DISABLE
• ENABLE
• AUTO
• UNAVAIL
ENUM One of the following:
• DISABLE
• ENABLE
• UNAVAIL
ENUM One of the following:
• DISABLE
• CSU
• NIU
• UNAVAIL
ENUM One of the following:
• DISABLE
• ENABLE
• UNAVAIL
Y/N Y or [N]
ENUM 1, 2, 3, ..., 28
UNEQUIPPED
Y/N Y or [N]
MX2800 STS-1 User Manual
Description
Provisions alarm relay response for the VT
AIS alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Identifies VT1 Configuration
• T1 sets VT1 configuration to M12 (4xT1).
• E1 sets VT1 configuration to G.747
(3xE1).
State (returns UNAVAIL if VT is
unequipped)
Circuit protection (returns UNAVAIL if VT
is unequipped)
Loopback detection (returns UNAVAIL if
VT is unequipped)
VT Hairpin status (returns UNAVAIL if VT
is unequipped)
Provisions alarm relay response for the VT
LOP alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
T1/E1 port to which the VT is mapped
Provisions alarm relay response for the VT
RFI alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
61204659L1-1A