Section 7, Circuit and Network Redundancy
Non-Redundant Mode
1.
NON-REDUNDANT MODE
In Non-Redundant Mode, the MX2800 STS-1 chassis houses only one controller card, and only one
network connection is available. Protection in the event of network failure is not provided. In the event of a
failure, an alarm is initiated and condition is indicated by the front panel LEDs.
the circuit configuration.
MX2800 STS-1
In the Non-Redundant mode, the STS-1 must be connected to the
OUT
jacks for
7-2
Figure 7-1. Non-Redundant Mode
NOTE
NET A
.
MX2800 STS-1 User Manual
Figure 7-1
is a diagram of
and
IN
61204659L1-1A