Table of Contents
Advertisement
MX2800 STS-1 User Manual
Table 9-9. TL1 Editing Data Dictionary for EQPT (Continued)
Keyword
DIAGLPBKTIMEOUT
DIAGRESET
PSBATTERYLOWRLY
PSCHARGERFAILRLY
PSFANFAILRLY
PSMALFNCRLY
PSPOWERFAILRLY
PSPOWERLOWRLY
61204659L1-1A
Type
Domain
ENUM
One of the following:
• DISABLE
• 1-MIN
• 5-MINL
• 10-MIN
• 15-MIN
• 30-MIN
• 45-MIN
• 1-HR
Y/N
Y or [N]
Y/N
Y or [N]
Y/N
Y or [N]
Y/N
Y or [N]
Y/N
Y or [N]
Y/N
Y or [N]
Y/N
Y or [N]
Transaction Language 1 (TL1), Section 9
Description
Identifies the amount of time before a
Diagnostic Loopback will time out
• DISABLE - timeout is disabled
• 1-MIN - timeout value is one minute
• 5-MINL - timeout value is five minutes
• 10-MIN - timeout value is ten minutes
• 15-MIN - timeout value is 15 minutes
• 30-MIN - timeout value is 30 minutes
• 45-MIN - timeout value is 45 minutes
• 1-HR - timeout value is 60 minutes
Resets Diagnostic Loopbacks
• Yes (Y) - reset the diagnostic loopback
• No (N) - do not reset the diagnostic
loopback
Provisions alarm relay response for the
Power Supply Battery Low alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Provisions alarm relay response for the
Power Supply Charger Fail alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Provisions alarm relay response for the
Power Supply Fan Fail alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Provisions alarm relay response for the
Power Supply Malfunction alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Provisions alarm relay response for the
Power Supply Power Fail alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
Provisions alarm relay response for the
Power Supply Power Low alarm
• Yes (Y) - enables alarm relay response
• No (N) - disables alarm relay response
TL1 Error Codes
9-27
Advertisement
Table of Contents
