arcconf getlogs
Obtains controller log information.
Provides access to the status and event logs of a controller. You can retrieve three types of logs:
DEVICE—A log of any device errors the controller has encountered.
●
DEAD—A log that records any occurrences of defunct devices.
●
EVENT—A log of special events that may have occurred (e.g., rebuilds, LDMs, etc.).
●
CLEAR—Optional, clears the specified controller log.
●
Syntax
ARCCONF GETLOGS <Controller#> <Type> [clear]
Parameters
Controller# is the controller number
Type is one of the following types of log to retrieve:
DEVICE
●
DEAD
●
EVENT
●
CLEAR
●
Example
ARCCONF GETLOGS 1 DEVICE
arcconf getstatus
The GETSTATUS function displays the status of any background command that is currently
running. Including information about the most recent rebuild, synchronization, logical-drive
migration, and compaction/expansion. The information includes the type of operation, status,
logical drive number, logical drive size, and percentage of the operation completed.
Note:
GETSTATUS reports currently active operations for both ARCCONF commands and
1
commands issued from the Adaptec Storage Manager.
GETSTATUS reports verify, clear, initialize, and secure erase operations on physical
2
devices.
GETSTATUS only reports active operations. It does not display information if the
3
operation is completed.
Syntax
ARCCONF GETSTATUS <Controller#>
Parameters
Controller# is the controller number
Example
ARCCONF GETSTATUS 1
Chapter 2: Using the Command Line Utility
15
●