arcconf getconfig
Lists information about the controllers, logical drives, and physical devices. This information
can include (but is not limited to) the following items:
Controller type
●
BIOS, boot block, device driver, and firmware versions
●
Logical drive status, RAID level, and size
●
Physical device type, device ID, presence of PFA
●
Physical device state
●
Enclosure information: fan, power supply, and temperature status
●
Syntax
ARCCONF GETCONFIG <Controller#> [AD/LD[LD#]/PD/AL]
Parameters
Controller# is the controller number
AD/LD/PD/AL options:
AD—Adapter information only
●
LD#—Optionally displays information about the specified logical device.
●
PD—Physical device information only
●
AL—All information (optional)
●
Example
ARCCONF GETCONFIG 1 AD
arcconf getlogs
Obtains controller log information.
Provides access to the status and event logs of a controller. You can retrieve three types of logs:
DEVICE—A log of any device errors the controller has encountered
●
DEAD—A log that records any occurrences of defunct devices
●
EVENT—A log of special events that may have occurred (e.g., rebuilds, LDMs, etc.)
●
Syntax
ARCCONF GETLOGS <Controller#> <Type> [clear/tabular]
Parameters
Controller# is the controller number
Type is one of the following types of log to retrieve:
DEVICE
●
DEAD
●
EVENT
●
CLEAR—Optional, clears the specified controller log
●
Chapter 2: Using the Command Line Utility
15
●