Enclosure information: fan, power supply, and temperature status
●
Syntax
ARCCONF CONFIG <Controller#> [AD|LD [LD#]|PD|AL]
Parameters
Controller# is the controller number
AD/LD/PD/AL options:
AD—Adapter information only
●
LD—Logical drive information only
●
PD—Physical device information only
●
AL—All information (optional)
●
Example
ARCCONF GETCONFIG 1 AD
arcconf getlogs
Obtains controller log information.
Provides access to the status and event logs of a controller. You can retrieve three types of logs:
DEVICE—A log of any device errors the controller has encountered.
●
DEAD—A log that records any occurrences of defunct devices.
●
EVENT—A log of special events that may have occurred (e.g., rebuilds, LDMs, etc.).
●
CLEAR—Optional, clears the specified controller log.
●
Syntax
ARCCONF GETLOGS <Controller#> <Type> [clear]
Parameters
Controller# is the controller number
Type is one of the following types of log to retrieve:
DEVICE
●
DEAD
●
EVENT
●
CLEAR
●
Example
ARCCONF GETLOGS 1 DEVICE
Chapter 2: Using the Command Line Utility
16
●