Installing On Netware; Installing On Unixware Or Openserver - Adaptec RAID 3085 User Manual

Getting Started Step 2: Installing and Starting Adaptec Storage Manager
6
Repeat these steps to install Adaptec Storage Manager on every Linux system that will be
part of your storage space.
7
Continue with Starting Adaptec Storage Manager on Linux on page

Installing on NetWare

This section describes how to install Adaptec Storage Manager on systems running NetWare.
See System Requirements on page 21
You need the latest Support Pack for your operating system so you can run the supported Java
Virtual Machine (JVM). You need JVM version 1.3 or later. To check your JVM version, load
JVM, type .
JAVA -VERSION
Note:
For the latest updates from Novell, visit www.novell.com.
To install Adaptec Storage Manager:
1
Insert the Adaptec Storage Manager Installation CD.
2
From the command prompt, type
3
From the command prompt, type:
xx_yy_zz:\netware\manager\install
where is the product CD,
xx
example,
adptcd_v2_01
The installation program starts.
4
Follow the on-screen instructions to complete the installation.
5
Repeat these steps to install Adaptec Storage Manager on every NetWare system that will
be part of your storage space.
6
Continue with Starting Adaptec Storage Manager on NetWare on page

Installing on UnixWare or OpenServer

Note:
If a previous version of Adaptec Storage Manager is installed on your system, you must
remove it before beginning this installation. Any customization files you created with the previous
version are saved and used in the upgrade. To remove Adaptec Storage Manager, type the pkgrm
command.
RaidMan
To install Adaptec Storage Manager:
1
Insert the Adaptec Storage Manager Installation CD.
2
Mount the Adaptec Storage Manager Installation CD:
mount -r -F cdfs /dev/cdrom/cdromdevicefile /mnt
where
cdromdevicefile
block device). To find the device file name, look in the /dev/cdrom directory.
3
Install Adaptec Storage Manager:
For UnixWare
pkgadd -d /mnt/unixware/manager/RaidMan.ds
For OpenServer
pkgadd -d /mnt/openserv6/manager/RaidMan.ds
for a list of supported operating systems.
and press Enter.
load cdrom
is the version number, and
yy
).
is the device file name (for example,
●
29.
is the release number (for
zz
29.
for a CD-ROM
c0b0t010
26