Installing On Openserver And Unixware; Installing On Solaris - Adaptec ICP5045BL User Manual

From the command prompt type load cdrom, then press Enter. From the command
2
prompt, type:
xx_yy_zz:\netware\manager\install
where is the product CD,
xx
example:
adptcd_v2_01
The installation program starts.
Follow the on-screen instructions to complete the installation.
3

Installing on OpenServer and UnixWare

To install on OpenServer and UnixWare systems or
ARCCONF
Insert the Adaptec Storage Manager installation CD in the CD drive.
1
Mount the Adaptec Storage Manager installation CD:
2
mount -r -F cdfs /dev/cdrom/cdromdevicefile /mnt
where
cdromdevicefile
To determine the actual filename, look in the /dev/cdrom directory.
Use pkgadd to install Adaptec Storage Manager:
3
pkgadd -d /mnt/unixware/manager/RaidMan.ds (for UnixWare)
pkgadd -d /mnt/openserv6/manager/RaidMan.ds (for OpenServer 6)
Follow the instructions on the screen to complete the installation.
4
Unmount the CD drive:
5
umount /mnt

Installing on Solaris

Note:
HRCONF is not supported by systems running Solaris.
To install ARCCONF on Solaris systems:
Insert the Adaptec Storage Manager Installation CD.
1
The CD mounts automatically. (If it doesn't, manually mount the CD using a command
similar to the one shown below. Refer to your operating system documentation for detailed
instructions.)
mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt
Install Adaptec Storage Manager:
2
pkgadd -d/<mount point>/solaris/manager/StorMan.ds
Follow the on-screen instructions to complete the installation.
3
Eject or unmount the Adaptec Storage Manager Installation CD. Refer to your operating
system documentation for detailed instructions.
Chapter 1: Getting Started with the Command Line Utility
is the version number, and
yy
is the device file, for example, c0b0t010, for the CD block device.
is the release number. For
zz
:
HRCONF on OpenServer
8
●