Figure 3-4 Usb To Virtual Com Port Properties; Windows Driver; Windows Driver Setup And Configuration - Microcom 428M Operator's Manual

Chapter 3 Getting Started
Figure 3-4 USB to Virtual Com Port Properties

3.4 Windows Driver

Some applications may choose to use a Windows driver with the printer's instead of creating
a resident LDS driver. The Windows driver typically sends everything over as a graphical
image so the overhead impacting performance is greater than if the resident LDS fonts and
instructions were used.
A WYSIWYG software package group, Nicelabel, has developed a Windows driver for the
Microcom Corporation printer's. The driver has been optimized to use with the Nicelabel
software but may also work for other Windows applications. The driver's may be
downloaded at http://www.nicelabel.com/Downloads/NiceDrivers.
3.4.1

Windows Driver Setup and Configuration

This section has been created to assist in the installation, setup, and configuration of the
Windows Driver. Any problems or issues with the driver should be reported to Nicelabel
directly.
Follow the steps outlined below to install and configure the Nicelabel Windows drivers:
1. Download and install the Nicelabel Windows driver by executing the "PRNINST.exe" file.
2. Follow the on screen instructions to successfully install the driver or drivers.
428M Operator's Manual - 880028-0112 3-5