Downloadable Font Command Summary - Microcom 412 Operator's Manual

Chapter 7
7.3

DOWNLOADABLE FONT COMMAND SUMMARY

The following is a list of commands referring to downloadable font functions.
^A ^D Command
100 Clear User RAM: This command will clear all downloaded fonts, graphics, and
stored label formats.
101 List Memory Bytes Available: The printer will send a < character followed by
the amount of bytes and finally a > character. (ie. >192680<)
XX 104 Load Font or Graphic Image into User Memory without Compression: ^A
select which slot to place the font/image in (1-255). This command should be
used with an "ASCII-HEX" file that contains only printable characters less than
80h. This is useful when sending image data over a 7 bit connection.
XX 107 Load Font or Graphic Image into User Memory using Binary Compression:
^A select which slot to place the font or graphic in (1-255). This command will
greatly reduce image download time and should be used whenever possible. It
can only be used on 8 bit data connections.
412 Operators Manual
Downloadable Fonts
65