Microcom 412 Operator's Manual page 56

Printer Commands
^A ^D Command
XX 75 Load Label Count: Tells the printer to print a batch of labels using the serial
number function if enabled. Can be used in conjunction with load copies count
(^D73, see section 5.3). The batch of labels will be printed when a ^D3 is
executed. Therefore, this must precede a ^D3 command. The only difference
between this command and ^D73 is in the ability of this command to increment
and decrement serial numbers in the batch.
A sample program using the single serial number feature:
^D57 
1 
1,416,25,2,1,5 
^D56 
^A2^D86 
^A1^D84 
^A5^D85 
^A3^D75 
^D2 
20 
^D3 
A sample program using the multiple serial number feature:
^D57 
3 
1,400,25,4,1,5 
2,100,75,4,1,5 
3,100,125,4,1,5 
^D56 
^A2^D88 
^A1^D88 
^A3^D89 
^A3^D75 
^D2 
100 
200 
300 
^D3 
48
Chapter 5
412 Operators Manual