Table of Contents
Advertisement
3.1
Unpacking and Inspection
The printers have been packaged in protective foam to help reduce the damage that may
occur during the shipment of product.
Inspect the shipping container(s) for signs of damage. If damage is evident, contact the
shipping company immediately to file a damage claim.
After the printer is removed from the container(s), verify that all the components ordered are
present and in good condition (see Figure 3 for an example). Additional items ordered may
be included in the foam accessory tray.
The protective foam and shipping container(s) should be kept and used if the printer is to be
shipped. Additional shipping materials may be ordered by contacting the Microcom
Corporation Service Department.
3.2
Connecting the Printer
Refer to Figure 4 and 5 for information regarding the proper printer connections.
326M User's Guide
Chapter 3: Getting Started
Figure 3
Printer Accessories (326M)
7
Advertisement
Table of Contents
Need help?
Do you have a question about the 326M and is the answer not in the manual?
Questions and answers