Table 4 Minimum Power Supply Specifications; Figure 4 Connecting The Power Adapter (426M) - Microcom 326M User Manual

Getting Started
3.2.1 Printer Power
Microcom Corporation offers a "desk type" universal power adapter as an option for the
326M and 426M printers. Any power adapter that conforms to the necessary specifications,
listed below, may be used. The printer requires a universal +24VDC 100 Watt power supply
that operates in the 90-264 VAC; 50-60 Hertz range; 4.2 Amps at a minimum. The power
supply should operate in an "output foldback mode" during an overload situation rather than
a shutdown and restart attempt (sometimes referred to as "Hiccup" mode). Contact your
Microcom Corporation representative for any questions regarding power adapter
requirements and/or specifications.
AC Input:
DC Output:
Power Rating:
Overload Mode:
Printer Power Connector:
Table 4
Note: Verify that the power supply jack is plugged into the printer before
plugging the power cord into an electrical outlet
Figure 4
8
90-264 VAC, 50/60HZ
+24Vdc, 4.2 Amps
100 Watts
Output Foldback Mode
4 Pin Power mini-DIN Connector
Minimum Power Supply Specifications
Connecting the Power Adapter (426M)
Chapter 3
4-Pin Power Mini
Din Connector
326M User's Guide