Using 12 X 18 Inch Or Sra3 Paper - Xerox DocuColor 12 User Manual

Use Paper Tray 5 for 12 x 18 inch (305 x 457 mm)
or SRA3 (320 x 450 mm) paper.
Refer to the Recommended Materials List and the
Color Materials Usage Guide for more information
about the paper you are loading.
NOTE:
9
2
•
•
•
3
•
4
1 Open Paper Tray 5 and fully extend the tray to
place it in the operating position. Refer to the
instructions in the previous section, if necessary.
2
Adjust the front Paper Guide of Paper Tray 5:
1. Unscrew the registration thumb screw,
5
2. Lift and reposition the Paper Guide in the slot
3. Tighten the registration thumb screw.
6
7
PAPER

Using 12 x 18 inch or SRA3 paper

Remove all stock from Paper Tray 5 after the
job is complete. Dust and moisture can cause
copy quality defects.
Do not add paper during a copying job.
To prevent damage, close Paper Tray 5 when
you are not using it.
The guaranteed image area for the DocuColor
12 is 297 x 438 mm. When copying an 11 x 17
inch (A3) image from the Document Glass,
set the Reduce/Enlarge feature to 102% for
best results.
illustrated in Figure 14, on the front side of
Paper Tray 5.
appropriate for the paper size you are using.
Figure 14: Front Paper Guide
and registration thumb screw
9–14 DOCUCOLOR 12 USER GUIDE