Xerox DocuColor 12 User Manual page 194

Paper Trays 1, 2, 3, and 4 hold the paper supply
for the DocuColor 12 color copier/printer.
Paper Tray 1, illustrated in Figure 1, can
accommodate 8.5 x 11 inch, A4, B5, or A5 paper.
Paper Trays 2, 3, and 4, illustrated in Figure 1,
can accommodate an assortment of standard
9
2
paper sizes, from 8 x 10 inch through 17 x 11 inch,
and A3 through B5.
KEY POINT: Paper Trays 2, 3, and 4 can handle
normal weight papers from 64 - 105 gsm (16lb -
28 lb bond) and also limited heavyweight papers
from 105 - 128 gsm. The heaviest standard paper
that can be run in Trays 2, 3, and 4 is 32 lb bond
3
(128 gsm). To run papers heavier than 105 gsm
(28 lb bond) one of the trays must be specifically
set to "Heavyweight" in Tools mode. Refer to the
Tray Management section of the Stem
Administration Guide.
Trays 2, 3, and 4 have width and length
adjustment guides that should be adjusted if the
paper size in the tray needs to be changed.
4
NOTE: Paper Trays 2, 3, and 4 can also
accommodate 12 x 18 inch paper through a
special, optional tray setup procedure performed
by a Xerox service representative. If you are
interested in this capability, contact your Xerox
service representative.
Refer to the Recommended Materials List and the
Color Materials Usage Guide for more information
5
about the materials you can use in Paper Trays 1,
2, 3, and 4.
6
7
PAPER
Paper Trays 1, 2, 3, and 4
Tray 1
Trays 2, 3, 4
9–2
Figure 1: Paper Trays
DOCUCOLOR 12 USER GUIDE