Xerox DocuColor 12 User Manual page 39

6
Clear All - Press this button to clear all
programming, including the copy quantity. All
features are reset to their respective default
settings. When the Clear All button is selected in
Interrupt mode, default settings are applied only to
the interrupting job.
NOTE: Clear All is not applied if a job is in
progress or if the machine is displaying a Jam or
Interlock Open screen.
7 Stop - When you select the Stop button, the
copier/printer completes the copy in process and
then stops. A message asking if you want to press
Start to continue the job or Clear to cancel the job
is displayed on the Touch Screen.
8 Start - Press this button to start a copy job or to
continue the copy process.
The copier/printer starts the first job automatically
if the Start button is pressed during warm-up. The
Touch Screen displays a message to indicate that
the copier/printer will start automatically.
To cancel the Automatic Start feature before the
copier/printer is done warming up, press the Stop
button.
DOCUCOLOR 12 USER GUIDE 2–5 GETTING TO KNOW YOUR DOCUCOLOR 12
1
2
3
4
5
6
7